Add test samples and results

1. Go to Projects and select the appropriate project from the list.
2. On the project home page, select Test / Inspections in the Quality Control section.
3. Optionally, use the Search field to filter the list.
4. Select the test number from the list.
5. In the Samples and Test Results section, select Add.
6. In the Defaults for Samples Test Results section, enter the following information:
   1. Enter the person that supervised the prepared samples in the Prepared By Contactfield.

      Alternatively, you can use the magnifying glass icon () to select a contact from the project directory.

   2. Optionally, enter the Location where the samples were taken.
   3. Optionally, enter the firm responsible for testing the samples in the Testing Company field.

      Alternatively, you can use the magnifying glass icon () to select a company from the project directory.

   4. Optionally, enter the location where the samples are to be taken for testing in the Testing Facility field.
   5. Select the Status.

      Options include Pending, Compliance, and Non-Compliance, with Pending as the default.

7. In the Samples Taken section, enter the following information for each sample:
   1. Select the Sample Date.
   2. Optionally, select the Sample Time.
   3. Optionally, enter the person who supervised the prepared samples in the Prepared By column.

      The contact specified in the Defaults for Samples Test Results section is automatically populated in this field, but can be changed.

   4. Optionally, enter the Location where the sample was taken.

      The location specified in the Defaults for Samples Test Results section is automatically populated in this field, but can be changed.

   5. Enter the Quantity of the sample.
   6. Optionally, enter the sample Size.

      For example, EA, CuYd, CuFt.

8. To add more samples, select Add New Line and repeat step 2.
9. Select Save & Close.